 |
|
|
| 64 Series Scanning Spectrophotometer |
The Model 6405 UV-Visible Range Spectrophotometer
is a 5nm bandpass scanning spectrophotometer. Five operating modes are implemented in this instrument -
Photometrics, Spectrum, Multi-wavelength, Quantitation and Kinetics. Wavelengths are selectable
between 190 and 1100nms at 0.1nm intervals. A range of accessories are available to complement this instrument including
a sipper pump, a multi-position cell holder, and an internal graphics printer for hard-copies of scans, readings, etc.
Features and Benefits | Wide Range of operation The Model 6405 UV/Visible Spectrophotometer
extends this range to between 190 and 1100nms (at 0.1nm intervals). Photometrics, Spectrum, Multi-wavelength, Quantitation and Kinetic measurements are all implemented in a user
friendly manner.
Graphics Display Both models feature a 240 x 128 pixel graphics LCD giving a
clear readout of calibration data, sample data and all set-up options.
Keypad A simple, easy to
use, keypad facilitates setting experimental parameters and initiating sample analysis procedures.
Data
Handling and Interfacing Both instruments incorporate a bi-directional RS232 interface allowing remote operation,
calibration and interrogation by an external personal computer. This operates over a fixed baud rate of 1200 bits per second.
Results can be downloaded to a personal computer by a single touch of the print key.
Lamp Housings A removable rear panel allows easy access to the Halogen lamp (on both instruments) and the Deuterium
lamp (on the Model 6405).
Sample
Compartment A large compartment is fitted to the instrument to house the full range of accessories developed for
the 6400 series. Various sizes of quartz, glass and plastic cuvettes are available for sample volumes down to 5µl.
Printer A 40 column impact mechanism printer can be fitted to either instrument to allow a hard copy
of all readings to be produced. The printer is ably capable of reproducing spectrum, kinetics and quantitation scans graphically
for future reference along with appropriate statistics.
Good Laboratory Practice This is supported
by a series of features. A user set identification number is be entered into any instrument (up to 6 digits in length) and
this number will appear on any printouts produced by the instrument. The instruments are supported by traceable calibration
standards to provide the on-going accuracy required for Good Laboratory Practice protocols. Each unit carries the CE mark
and is covered by a three year warranty. NOTE: The deuterium lamp is warranted for 1 year.
|
SPECIFICATIONS
| Model 6405 | Wavelength | | Range | 190
to 1100nm | Resolution | 0.1nm | Accuracy | ±1nm | Bandwidth | 5nm | Transmittance | | Range | 0 to
199.9% | Resolution | 0.1% | Absorbance | | Range | -0.300
to 3.000A | Resolution | 0.001A | Concentration | | Range | -300
to 9999 | Resolution | 0.001 / 0.01 / 0.1 / 1 | Factor | | Range | 0.000
to 9999.99 | Photometric Linearity | 0.005A @ 1.0A | Stray Light | 0.05%T
@ 340nm | Drift | 0.001A per hour | Display | 240
x 128 pixel graphics LCD | RS232 port | Bi-directional | Analog output | 1mV
per 0.1% Transmittance
1mV per 0.001 Absorbance
1mV per 1 Concentration unit | Visible Light
Source | Tungsten Halogen lamp | UV Light Source | Deuterium lamp | Input Voltage | 115V AC / 230V AC ±20% | Input Power | <150W | Operating temperature | 15 to 30ºC | Operating
humidity | 0 to 90% RH | Weight | 15Kg | Warranty | 3 years parts and labor
(tungsten lamps no warranty,
xenon and deuterium lamps 1 year) |
|
|
|
